t110 Hydraulic Schematic T110 HYD STD EMEA V-1374-legend-2

HYDRAULIC PUMP.............Gear Type:
13.1 GPM (49,6 L/min) @ 3270 Pump RPM
VARIABLE DISPLACEMENT BIDIRECTIONAL
HYDROSTATIC PUMP: 17.5 GPM (66,4 L/min)
1
INLET SCREEN / FILTER
32
2
19
ANTICAVITATION VALVE
33
CHECK VALVE: Inside of Inlet Fitting
9
FILTER - CASE DRAIN: 90 micron
11
FILTER BYPASS VALVE: 40 PSI (2,76 bar)
12
ATMOSPHERIC RESERVOIR
10
5
RELIEF VALVE – CHARGE INLET:
348 PSI (24 bar)
6
BIDIRECTIONAL HYDROSTATIC DRIVE MOTOR:
211.6 GPM (801,2 L/min) @ 3270 Pump RPM
24
25
PILOT ACTIVATED DIRECTIONAL CONTROL
VALVE: FLOW CONTROL SPOOL
26
CHECK VALVE – BUCKET POSITION VALVE
LEGEND
QUICKCOUPLER FEMALE
QUICKCOUPLER MALE
RELIEF / ANTICAVITATION VALVE –
PORT: 4000 PSI (275,79 bar)
LOAD CHECK VALVE
RELIEF VALVE – MAIN:
3000 PSI (206,84 bar)
CHARGE PUMP:
6.4GPM (24,2 L/min) @ 3270 Pump RPM
3
22
21
20
17
18
16
OIL COOLER
8
23
SOLENOID ACTIVATED DIRECTIONAL
CONTROL VALVE: Bucket Positioning
On / Off
4
RELIEF / REPLENISHING VALVE – HIGH
PRESSURE: 3770 PSI (260 bar)
7
DRIVE MOTOR SHUTTLE VALVE
13
FLOW DIVIDER ADJUSTMENT VALVE
14
FILTER BYPASS VALVE: 50 PSI (3,45 bar)
27
PILOT ACTIVATED DIRECTIONAL
CONTROL VALVE: UNLOADING SPOOL
28
15
DIFFERENTIAL PRESSURE SWITCH:
40 PSI (2,76 bar)
29
LIFT CYLINDER
PILOT ACTIVATED DIRECTIONAL
CONTROL VALVE: BICS Cartridge
30
SOLENOID AVTIVATED DIRECTIONAL
CONTROL VALVE – BICS Control
31
TILT CYLINDER
FILTER – CHARGE: 20 micron Nom,
40 micron Abs
FILTER – HYDRAULIC: 11 micron
HYDRAULIC/HYDROSTATIC SCHEMATIC
T110 (S/N AEOJ11001 AND ABOVE)
Printed in U.S.A.
(PRINTED SEPTEMBER 2009)
V-1374 legend
RESTRICTION - 0.089 inch (2,26 mm)
1 of 2
Dealer Copy -- Not for Resale
PILOT ACTIVATED DIRECTIONAL CONTROL
INLET SCREEN / FILTER: Inside of Inlet
Fitting
34
35
PULL BUTTON ACTIVATED
DIRECTIONAL CONTROL VALVE:
Lift Arm Bypass Valve
NOTE: Unless otherwise specified, springs have
NO significant pressure value.
36
SOLENOID AVTIVATED DIRECTIONAL
CONTROL VALVE – Auxiliary Hydraulic Lock
V-1374 legend (11-30-09)
45
CHECK VALVE - With 80 PSI (5,5 bar) Spring
42
43
RELIEF VALVE - 2000 PSI (137 bar)
RELIEF VALVE - 1200 PSI (83 bar)
FILTER - Bob-Tach Valve
39
PILOT ACTIVATED DIRECTIONAL
CONTROL VALVE - HYDRAULIC
POWERED BOB-TACH
38
40
RESTRICTION - 0.089 inch (2,26 mm)
41
RESTRICTION - 0.025 inch (0,6 mm)
44
SOLENOID ACTIVATED DIRECTIONAL
CONTROL VALVE (TWO COIL)
46
CHECK VALVE - With 300 PSI (20,7 bar) Spring
with 0.016 inch (0,40 mm) orifice
37
RESTRICTION
SAPR BRAKE (Spring Applied – Pressure
Release)
SOLENOID AVTIVATED DIRECTIONAL
CONTROL VALVE – SAPR Brake
47
48
49
CHECK VALVE: Inside of Inlet Fitting
LEGEND
HYDRAULIC/HYDROSTATIC SCHEMATIC
T110 (S/N AEOJ11001 AND ABOVE)
(PRINTED SEPTEMBER 2009)
V-1374 legend
2 of 2
Dealer Copy -- Not for Resale